CHARACTERIZATION OF PYROLYSIS OIL PRODUCED FROM POLYPROPYLENE (PP) PLASTIC BASED
-
Dominggus G. H. Adoe(1*)
Program Studi Teknik Mesin, Fakultas Sains dan Teknik Universitas Nusa Cendana
-
Devi Yola Satria(2)
UNDANA
-
Arifin Sanusi(3)
Program Studi Teknik Mesin, Fakultas Sains dan Teknik Universitas Nusa Cendana
(*) Corresponding Author
Abstract
This research was conducted to determine the characteristics of plastic waste pyrolysis oil and compare it with the characteristics of gasoline. The things studied included the physical and chemical properties of pyrolysis oil. The physical properties studied included viscosity and density, while the chemical properties were the heating value. The research was conducted using Polypropylene (PP) plastic, the reactor used was a single reactor with the reactor temperature set at 300 and 3500C. The results showed that the calorific value of pyrolysis oil was 0.194068464 J – 0.209067264 J, the density was 0.7941 – 0.8083 kg/l and the viscosity was 0.9500151572 cPs - 0.9651967743 cPs.
Downloads
References
M. {adi, A. Susanto, and F. Astuti, “Analisis Unjuk Kerja Hasil Minyak Alat Pirolisis dari Bahan Plastik Berkapasitas 2 Kg,” Piston J. Tech. Eng., vol. 3, no. 2, Art. no. 2, Jan. 2020, doi: 10.32493/pjte.v3i2.7347.
Zurohaina et al., “ANALISA BAHAN BAKAR MINYAK HASIL PIROLISIS SAMPAH PLASTIK JENIS PP DAN PET TERHADAP KINERJA GENERATOR SET PADA PLTSA PLASTIK KAPASITAS 1000 WATT,” KINETIKA, vol. 10, no. 1, Art. no. 1, 2019.
W. Ardiyansyah, “Rancang Bangun Alat Pengolahan Limbah Plastik (Pirolisis) Menjadi Bahan Bakar Alternatif Menggunakan Metode Dfma (Design For Manufacture And Assembly),” ENOTEK J. Energi Dan Inov. Teknol., vol. 1, no. 01, Art. no. 01, Oct. 2021, doi: 10.30606/enotek.v1i01.1001.
J. Wahyudi, H. T. Prayitno, and A. D. Astuti, “Pemanfaatan limbah plastik sebagai bahan baku pembuatan bahan bakar alternatif,” J. Litbang Media Inf. Penelit. Pengemb. Dan IPTEK, vol. 14, no. 1, pp. 58–67, 2018.
D. Arifatin, “Tata Cara Teknik Operasional Pengelolaan Sampah Perkotaan”, Accessed: Jul. 13, 2023. [Online]. Available: https://www.academia.edu/17161988/Tata_Cara_Teknik_Operasional_Pengelolaan_Sampah_Perkotaan
D. G. H. Adoe, W. Bunganaen, I. F. Krisnawi, and F. A. Soekwanto, “Pirolisis Sampah Plastik PP (Polyprophylene) menjadi Minyak Pirolisis sebagai Bahan Bakar Primer,” LONTAR J. Tek. Mesin Undana, vol. 3, no. 1, pp. 17–26, 2016.
I. Lufina, B. Susilo, and R. Yulianingsih, “Studi Pemanfaatan Minyak Karet ( Hevea brasiliensis ) sebagai Bahan Bakar pada Kompor Rumah Tangga Study of Rubber Oil Utilization as Residential Stove Fuel,” vol. 1, no. 1, pp. 60–68, 2013.
U. Karakteristik et al., “Uji Karakteristik Minyak Pirolisis Berbahan Baku Limbah Plastik,” pp. 13–20.
Ridhuan et al.,” Proses Pembakaran Pirolisis dengan Jenis Biomassa dan Karakteristik Asap Cair yang Dihasilkan” 2019
Rosmiati, V, BAB II. Tinjauan Pustaka, 2020
Aninsi, N, Rumus, Pengertian dan Perpindahan Kalor (2021)
Anggraini Lisa et al., Laporan Praktikum Farmasi Fisika “Penentuan Viskositas Zat Cair dengan Viskometer Ostwald”., (2015)
Jamilatun et al., “Pirolisis Tandan Kelapa Sawit untuk Menghasilkan Bahan Bakar Cair, Gas, Water Fase, dan Charcoal” Universitas Ahmad Dahlan, Daerah Istimewa Yogyakarta, 2022)
Faiz F, Hidayat D, Siregar, Uji Karakteristik Minyak Pirolisis Berbahan Baku Limbah Plastik Polyphropylene., t.t.
Copyright (c) 2023 LONTAR Jurnal Teknik Mesin Undana
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
