DESAIN ALAT PEMBERSIH PANEL SURYA OTOMATIS
-
Jahirwan Ut Jasron(1*)
-
Yasoni Eliaser Seran(2)
Program Studi Teknik Mesin, Fakultas Sains dan Teknik Universitas Nusa Cendana
-
Ben V Tarigan(3)
Program Studi Teknik Mesin, Fakultas Sains dan Teknik Universitas Nusa Cendana
(*) Corresponding Author
Abstract
Solar energy is one type of energy utilized, especially for solar panels. Solar panels can convert solar energy into electrical energy. Solar panels, as an alternative source of electrical energy, can be utilized by people who need electrical energy. This research aims to determine the output power produced by solar panels that have not been cleaned and have been cleaned using an automatic solar panel cleaning tool from the difference in motor rotation variations, namely 11 rpm, 27 rpm, and 330 rpm. This research shows that the output power of solar panels that have yet to be cleaned on the first day produces a power of 56.3.
In contrast, the output power of solar panels that have been cleaned produces a power of 103.1, and on the second day, the output power produced by solar panels that have not been cleaned. Cleaned was 71.3, and the power of solar panels that had been cleaned produced a power of 97.1. Then, on the third day, the power produced by solar panels that had not been cleaned was 65.5, and the power of solar panels that had been cleaned produced power of 78,6.
Downloads
References
M. Abrori, S. Sugiyanto, and T. F. Niyartama, “Pemanfaatan Solar Cell Sebagai Sumber Energi Alternatif dan Media Pembelajaran Praktikum Siswa Di Pondok Pesantren ‘Nurul Iman’ Sorogenen Timbulharjo, Sewon, Bantul, Yogyakarta Menuju Pondok Mandiri Energi,” J. Bakti Saintek J. Pengabdi. Masy. Bid. Sains dan Teknol., vol. 1, no. 1, p. 17, 2017, doi: 10.14421/jbs.1131.
M. Rif’an, S. HP, M. Shidiq, and R. Yuwono, “Optimasi Pemanfaatan Energi Listrik TenagaMatahari di Jurusan Teknik Elektro UniversitasBrawijaya,” Electr. Electron. Commun. Control. Informatics, Syst., vol. 6, no. 1, pp. 44–48, 2012.
Y. Wiranatha, J. Kusuma, N. Soedjarwanto, A. Trisanto, and D. Despa, “Rancang Bangun Penggerak Otomatis Panel Surya Menggunakan Sensor Photodioda Berbasis Mikrokontroller Atmega 16,” J. Rekayasa dan Teknol. Elektro, vol. Vol.9, no. 1, pp. 11–20, 2015, [Online]. Available: https://electrician.unila.ac.id/index.php/ojs/article/view/156
B. H. Purwoto, J. Jatmiko, M. A. Fadilah, and I. F. Huda, “Efisiensi Penggunaan Panel Surya sebagai Sumber Energi Alternatif,” Emit. J. Tek. Elektro, vol. 18, no. 1, pp. 10–14, 2018, doi: 10.23917/emitor.v18i01.6251.
A. Gaur and G. N. Tiwari, “Performance of Photovoltaic Modules of Different Solar Cells,” J. Sol. Energy, vol. 2013, pp. 1–13, 2013, doi: 10.1155/2013/734581.
E. Kabir, P. Kumar, S. Kumar, A. A. Adelodun, and K. H. Kim, “Solar energy: Potential and future prospects,” Renew. Sustain. Energy Rev., vol. 82, no. September 2016, pp. 894–900, 2018, doi: 10.1016/j.rser.2017.09.094.
M. U. Hassan, M. I. Nawaz, and J. Iqbal, “Towards autonomous cleaning of photovoltaic modules: Design and realization of a robotic cleaner,” 2017 1st Int. Conf. Latest Trends Electr. Eng. Comput. Technol. INTELLECT 2017, vol. 2018-January, pp. 1–6, 2017, doi: 10.1109/INTELLECT.2017.8277631.
M. Mani and R. Pillai, “Impact of dust on solar photovoltaic (PV) performance: Research status, challenges and recommendations,” Renew. Sustain. Energy Rev., vol. 14, no. 9, pp. 3124–3131, 2010, doi: 10.1016/j.rser.2010.07.065.
M. Malik Al Falah, I. N. Satya Kumara, and W. G. Ariastina, “Perkembangan Riset Dan Produk Komersial Sistem Pembersih Panel Surya,” J. SPEKTRUM, vol. 8, no. 4, p. 29, 2022, doi: 10.24843/spektrum.2021.v08.i04.p4.
M. R. W. Kusuma, E. Apriaskar, and D. Djunaidi, “Rancang Bangun Sistem Pembersih Otomatis Pada Solar Panel Menggunakan Wiper Berbasis Mikrokontroler,” Techné J. Ilm. Elektrotek., vol. 19, no. 01, pp. 23–32, 2020, doi: 10.31358/techne.v19i01.220.
Copyright (c) 2025 LONTAR Jurnal Teknik Mesin Undana
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
