ANALYSIS OF FUEL OIL PRODUCED BY PYROLYSIS OF PP (POLYPROPYLENE) TYPE PLASTIC WASTE ON THE CHARACTERISTICS OF THE PRODUCED OIL
Abstract
This research aims to determine the density and viscosity of oil resulting from pyrolysis of plastic waste and to find out the relationship between density and viscosity of the pyrolysis oil produced. This research was carried out using polypropylene (PP) plastic, with the reactor used being a single reactor with the reactor temperature set at 200c and 250c. The results of the research show that the density is 0.751 – 0.773 kg/l, the viscosity is 0.574822548 – 0.841376288 cPs, where during the research carried out density and viscosity have an interrelated relationship. Changes in pyrolysis temperature can significantly affect the viscosity and density of pyrolysis oil, besides that, different research times and materials can influence the results of the pyrolysis process.
Downloads
References
. Aprian Ramadhan and others, ‘PENGOLAHAN SAMPAH PLASTIK MENJADI MINYAK MENGGUNAKAN PROSES PIROLISIS’, 44–53.
. Dominggus G H Adoe, Gusnawati, and Nanang Ernanto, ‘Analisis Pengaruh Temperatur Pada Metode Pirolisis Dari Sampah Plastik PP ( Polypropylene ) Terhadap Kapasitas Dan Kuantitas Minyak Pirolisis’, Jurnal Penelitian Enjiniring (JPE), 24.2 (2020), 177–81.
. Juliya Ascha Riandis, Agus Restu Setyawati, and Ari Susandy Sanjaya, ‘Pengolahan Sampah Plastik Dengan Metode Pirolisis Menjadi Bahan Bakar Minyak’, Jurnal Chemurgy, 5.1 (2021), 8.
. Mahendra Aji Wicaksono and Arijanto, ‘Pengolahan Sampah Plastik Jenis Pet(Polyethilene Perepthalathe) Menggunakan Metode Pirolisis Menjadi Bahan Bakar Alternatif’, Jurnal Teknik Mesin, 5.1 (2017), 9–15
. Dominggus G H Adoe and others, ‘Pirolisis Sampah Plastik PP (Polyprophylene) Menjadi Minyak Pirolisis Sebagai Bahan Bakar Primer’, LONTAR Jurnal Teknik Mesin Undana, 3.1 (2016), 17–26.
. Arwizet Arwizet, ‘Mesin Destilasi Pengolahan Sampah Plastik Menjadi Bahan Bakar Minyak Menggunakan Kondensor Bertingkat Dan Pendingin Kompresi Uap’, INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 17.2 (2017), 75–88.
. Pemanfaatan Limbah and others, ‘Tugas Akhir-Tk 145501’, 2018.
. Subardi Anang and others, ‘Peran Abu Sekam Padi Pada Komposit Polimer Jenis Pet’, Jurnal "FLYWHEEL, 8.1 (2017), 15–24.
. Kemas Ridhuan and others, ‘Pengaruh Cara Pembakaran Pirolisis Terhadap Karakteristik Dan Efisisensi Aranag Dan Asap Cair Yang Dihasilkan’, Forum Grup Diskusi Teknologi Perguruan Tinggi Muhamadiyah (FGDT XI-PM), 2018, 141–50.
. Nabila Salsabila, Yushardi Yushardi, and Sudartik Sudartik, ‘Analisis Kelebihan Kekurangan Pengolahan Limbah Plastik Menjadi Bahan Bakar Melalui Proses Pirolisis’, Jurnal Mekanova : Mekanikal, Inovasi Dan Teknologi, 9.2 (2023), 105–13
. Purwaningrum, Pramiati. 2016. ‘‘Upaya Mengurangi Timbulan Sampah Plastik di
. Lingkungan’’, Jurusan Teknik Lingkungan, vol. 8, no. 2.
. Surono, U. B, “Berbagai Metode Konversi Sampah Plastik Menjadi Bahan Bakar
. Minyak,”Jurnal Teknik,3.1, 32-40, 2013”.
. w. Ardiyansyah, s. Anwar dan y. Rizal, “Rancang Bangun Alat Pengolahan Limbbah Plastik (Pirolisis) Menjadi Bahan Bakar Alternatif Mengguakan Metode Dfma (Design For Manufacture And Assembly),”2021.
. Universitas Nusa Cendana, SKRIPSI PIROLISIS SAMPAH PLASTIK PP ( POLYPROPHYLENE ) MENJADI FERDYAN ADI SOEKWANTO JURUSAN TEKNIK MESIN, 2016.
Copyright (c) 2025 LONTAR Jurnal Teknik Mesin Undana

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Muhammad Hasby Ashsidiq(1*)


