Analisis Sistem Kerja instalasi Gas Okigen Pada Gedung Rumah Sakit Umum Daerah Ruteng
-
Yohanes A. Ngangut(1*)
Universitas Nusa Cendana
-
Yeremias M Pell(2)
Program Studi Teknik Mesin, Fakultas Sains dan Teknik Universitas Nusa Cendana
-
Verdy A. Koehuan(3)
Program Studi Teknik Mesin, Fakultas Sains dan Teknik Universitas Nusa Cendana
-
Jemssy R. Rohi(4)
Program Studi Teknik Mesin, Fakultas Sains dan Teknik Universitas Nusa Cendana
(*) Corresponding Author
Abstract
Research entitled Analysis of the working system of medical gas installations in the Ruteng regional general hospital building. The medical gas system is an installation to meet the need for medical gas, the medical gas installation has been developed to eliminate the difficulties of using conventional medical gas, in this system the high-pressure gas cylinder, compressor and vacuum are centralized in one place, then the gases and air It flows into the room through pipes. This study aims to determine the performance or pressure reduction of the oxygen gas (O2) system installation in the inpatient room on the 3rd floor, Ruteng Regional Hospital. The results of this research show that the diameter required to flow oxygen gas for installation lines A and B for the main pipe, branch pipe and distribution pipe respectively is 0.75 inch, 0.5 inch and 0.375 inch with a total pressure drop for line A 160 kPa, and B 178 kPa.
Downloads
References
Abulayla, O. (2021). Medical Gas System.
Efrila, M. (2018). Enforcement of Regulations in Medical Gas Management in Indonesia. 2018 International Conference on Energy and Mining Law (ICEML 2018), 81–85.
Haryanto; Herbowo. (2021). Rancang Bangun Sistem Pemantauan Tekanan Gas Medis Berbasis Iot (Internet Of Things) Menggunakan Arduino Dan Sensor Mpx 5700 Di Rsup Dr. Soeradji Tirtonegoro Klaten. Program Studi Teknik Elektro, Fakultas Teknik, Universitas Widya Dharma Klaten.
Hendryani, A., Nurdinawati, V., & Dharma, N. (2021). Desain Manifold dengan Monitoring Tekanan untuk Pertukaran Otomatis Tabung Gas Oksigen Medis di Rumah Sakit. Teknik, 42(1), 45–51.
Highley, D. (2009). Medical gases, their storage and delivery. Anaesthesia & Intensive Care Medicine, 10(11), 523–527.
International ASTM. (2013). Standard Guide for Designing Systems for Oxygen Service: Vol. G88 − 05. https://doi.org/10.1520/G0088-05
Lamjaya, P. (2022). Optimalisasi Proyek Instalasi Gas Medis Dengan Menggunakan Critical Path Method (CPM) Dan Program Evaluation And Review Technique (Pert) Di Rsia Asih Jakarta Selatan. TEKNOKRIS, 25(2), 41–49.
Liu, W., Khatibi, N., Sridharan, A., & Zhang, J. H. (2011). Application of medical gases in the field of neurobiology. Medical Gas Research, 1, 1–18.
Menon, E. S. (2005). Gas pipeline hydraulics. Crc Press.
Nugroho, S. B. A., Hermawan, I. R., & MT, M. M. (2018). Analisa Perancangan Instalasi Gas Untuk Rumah Susun Penggilingan Jakarta Timur. Prosiding SENIATI, 4(1), 223–228.
Peraturan Menteri Kesehatan Republik Indonesia Nomor 4 Tahun (2016). www.peraturan.go.id
Rahmat, B. (2019). Telemonitoring Gas Medis. Prosiding Seminar Nasional Widya Husada.
Wijaya, N. H., Untara, B., & Khoirunnisa, I. (2019). Monitoring Tekanan Gas Medis Pada Instalasi Gas Medis Rumah Sakit. Medika Teknika: Jurnal Teknik Elektromedik Indonesia, 1(1), 19–24.
Copyright (c) 2026 LONTAR Jurnal Teknik Mesin Undana
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
