Penerapan Strategi Perawatan Reliability Centered Maintenance (RCM) Pada Electric Motor Pompa Sentrifugal Jenis Multistage Perusahaan Minyak
-
Anissa Shifa Azahra(1)
Program Studi Matematika, Fakultas Sains, Institut Teknologi Sumatera
-
Mansyaul Huda(2)
Program Studi Teknik Mesin, Fakultas Teknologi Industri, Institut Teknologi Sumatera
-
Mario Agung Halomoan Pakpahan(3)
Program Studi Teknik Mesin, Fakultas Teknologi Industri, Institut Teknologi Sumatera
-
Muhammad Faiz Ramadhan(4)
Institut Teknologi Sumatera
-
Fajar Paundra(5*)
Program Studi Teknik Mesin, Fakultas Teknologi Industri, Institut Teknologi Sumatera
(*) Corresponding Author
Abstract
In this practical work activity, the author conducted an FMEA (Failure Mode and Effect Analysis) analysis on a medium voltage electric motor (4160 V) used in a multistage centrifugal pump in oil company industry. The analysis was conducted to identify failure modes, causes, impacts, and determine severity, occurrence, and detection values which were then used to calculate the Risk Priority Number (RPN). Based on the results of the analysis, it was found that the winding component has the highest RPN value, followed by the shaft and grounding cable, so it requires priority in handling. The maintenance strategies applied include Preventive Maintenance (PM), Predictive Maintenance (PDM), and Corrective Maintenance (CM), with maintenance intervals adjusted for each component. Through this analysis, maintenance recommendations can be determined to reduce the risk of damage and maintain the continuity of tool operations, while providing practical experience in the application of Reliability Centered Maintenance (RCM) strategies in oil company industry.
Downloads
References
I. N. Gusniar, “Optimalisasi Sistem Perawatan Pompa Sentrifugal Di Unit Utility Pt.Abc,” J. Ilm. Solusi, Vol. 1, No. 1, Pp. 77–86, 2014.
M. A. Siregar And W. S. Damanik, “Pengaruh Variasi Sudut Keluar Impeler Terhadap Performance Pompa Sentrifugal,” J. Rekayasa Mater. Manufaktur Dan Energi, Vol. 3, No. 2, Pp. 166–174, 2020, Doi: 10.30596/Rmme.V3i2.5278.
Z. Anthony, “Motor Induksi,” Mesin List. Arus Bolak-Balik, Pp. 1–184, 2019, [Online]. Available: Https://Drive.Google.Com/File/D/1lhwupcci2es1dbnuu6-Jgf7g2unzxk6p/View?Usp=Sharing.
Muhammad Iqbal Naufal And Irwanto Irwanto, “Motor Listrik 3 Fasa Sebagai Sistem Penggerak Motor Roll Pada Mesin Case Sealer Di Pt. Matahari Megah,” J. Sains Dan Teknol., Vol. 2, No. 1, Pp. 32–45, 2023, Doi: 10.58169/Saintek.V2i1.132.
A. Rachmat And A. Ruhama, “Perancangan Dan Pembuatan Alat Uji Motor Listrik Induksi Ac 3 Fasa Menggunakan Dinamometer Tali (Rope Brake Dynamometer),” J-Ensitec, Vol. 1, No. 01, Pp. 7–16, 2014, Doi: 10.31949/J-Ensitec.V1i01.11.
S. Ruftyas, “Analisis Pemeliharaan Mesin (Maintenance) Dalam Meningkatkan Efisiensi Biaya Pemeliharaan Pada Ciwawa Cake & Bakery. Diss. Fakultas Ekonomi Dan Bisnis Unpas,” Vol. 53, No. 9, Pp. 1689–1699, 2017.
M. I. Pasaribu, D. A. A. Ritonga, And A. Irwan, “Analisis Perawatan (Maintenance) Mesin Screw Press Di Pabrik Kelapa Sawit Dengan Metode Failure Mode And Effect Analysis (Fmea) Di Pt. Xyz,” Jitekh, Vol. 9, No. 2, Pp. 104–110, 2021, Doi: 10.35447/Jitekh.V9i2.432.
H. Ninny Siregar And S. Munthe, “Analisa Perawatan Mesin Digester Dengan Metode Reliabity Centered Maintenance Pada Ptpn Ii Pagar Merbau,” J. Ind. Manuf. Eng., Vol. 3, No. 2, Pp. 87–94, 2019, [Online]. Available: Http://Ojs.Uma.Ac.Id/Index.Php/Jime
Copyright (c) 2026 LONTAR Jurnal Teknik Mesin Undana
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
