Perancangan Mesin Pemecah Kulit Kemiri
-
Ahmad Al Buchari A(1*)
Universitas Muhammadiyah Malang
(*) Corresponding Author
Abstract
The purpose of this study is to design and test a candlenut shelling machine to facilitate agricultural product entrepreneurs in the production process. The method used is the analysis method by calculating torque and power and using Autodesk software to draw tool designs, design tools, test tools, design tools using materials such as angle iron, 5 hp 2800 rpm DC electric motors, pulleys, v-belts and drive shafts. The results of this machine test use the principle of striking force on iron connected to an electric machine (DC) using a shaft and pulley and the breaking process takes an average of 1 minute for 4 tool trials. Then the percentage of the results of breaking the candlenut shells reaches 75-80% round candlenuts and 20-25% broken candlenuts. After the breaking process is complete, the candlenut core and skin are separated manually. In conclusion, the design of this candlenut shelling machine can be used properly after going through several trials.
Keywords: Design, Breaking Machine, Autodesk, Throwing System.
Downloads
References
Abbas, Hammada at al. (2023). RANCANG BANGUN MESIN PEMECAH CANGKANG KEMIRI. ILTEK: Jurnal Teknologi, 18(02), 112-116.
Anggara, M., & Desiasni, R. (2019). Pengaruh Bentuk Permukaan Heat Absorber Plate terhadap Temperatur dan Waktu Pengeringan pada Solar Dryer Kemiri. Turbo: Jurnal Program Studi Teknik Mesin UM Metro, 8(1), 28-32.
Ardi at al (2023). Rancang Bangun Modifikasi Alat Press Briket Sekam Dengan Sistem Hidrolik. ILTEK: Jurnal Teknologi, 18(01), 11-15.
Argo at al. (2018). PENGARUH METODE PENGERINGAN TERPHADAP KARAKTERISTIK KUPASAN KEMIRI (Aleurites moluccana. L Willd). Journal of Tropical Agricultural Engineering and Biosystems-Jurnal Keteknikan Pertanian Tropis dan Biosistem, 4(2), 103-109.
Aziz, ZA, & Anggara, M. (2022). Analisis kinerja variasi jenis dan ketebalan isolator pada dinding ruang mesin pengering kemiri. Jurnal Turbo, Program Studi Teknik Mesin UM Metro, 11 (1), 71-80.
Nuryasin, M., & Mitrohardjono, M. (2019). Strategi perencanaan pengembangan pendidikan Islam di Indonesia. Jurnal Tahdzibi: manajemen pendidikan islam, 4(2), 77-84.
Sinaga, R., & Wulandani, D. (2016). Karakteristik Fisik dan Mekanik Kemiri (Aleurites moluccana Wild.). Jurnal Keteknikan Pertanian, 4(1), 97-106
Copyright (c) 2026 LONTAR Jurnal Teknik Mesin Undana
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
