Pengaruh Fraksi Berat Terhadap Kekuatan Bending Komposit Serbuk Kayu Jati
-
Habel Tnunay(1)
Program Studi Teknik Mesin, Fakultas Sains dan Teknik Universitas Nusa Cendana
-
Yeremias M Pell(2*)
Universitas Nusa Cendana
-
Jack C.A. Pah(3)
Program Studi Teknik Mesin, Fakultas Sains dan Teknik Universitas Nusa Cendana
-
Kristomus Boimau(4)
Program Studi Teknik Mesin, Fakultas Sains dan Teknik Universitas Nusa Cendana
(*) Corresponding Author
Abstract
Most people need wood as a building material for decorative furniture which continues to increase over time, wood production has decreased. Given the abundance of solid waste and plastic waste and the increasing use of wood/boards, the manufacture of composite products is one alternative in utilizing these wastes to produce innovative and creative products as basic materials to replace wood/boards and also for raw materials in the creative industry. Various efforts have been made to replace the use of wood boards. Composite is a material formed from two or more components combined. This composite diamond includes plastic reinforced with fibers, metals, ceramics, plastic polymers with fillers or a mixture of two or more materials to obtain new materials. Composite is a combination of additional materials in the form of fibers, granules, powders, glass fibers, carbon, ceramics and metal fibers in different lengths in a composite matrix that has different characteristics to produce a material that has certain properties and characteristics that are different from the properties of its original constituents.
Downloads
References
Setyawaty, D., (2003), Komposit Serbuk Kayu Plastik Daur Ulang: Teknologi Alternatif Pemanfaatan
Limbah Kayu dan Plastik, http://tumoutou.net/702_07134/dina_setyawati.htm. 22 Agustus
Anonimous, 2003, Polimerisasi Alkena, http://www.chem-is-try.org/index.php, Tanggalakses : Mei 2007
Adjiantoro, Bintang Adjiantoro. Sriyono, Bambang. 2014. Pembuatan Material Komposit Matriks Paduan Al–6,2%Mg/Al2O3(p) Dengan Proses Stirr-Casting. Majalah Metalurgi. V 29.1. 2014: 630-70.
Brandheriau. L., et al. (2002). Comparison Between Modulus of Elasticity Value Calculated Using and 4 Point Bending Test on Wooden Samples. Wood Science and Thecnology 36 (2002). 367-383. DOI 10.1007/s00226-002-0147-3.
Herminiati, 2003 komposit dari kantong plastik fleksibeldan serbuk gergaji,majalah kulit karet dan plastic vol 19 no 1 tahun 2003 ISSN 0215-0115 Balai besar kulit Karet dan plastic Yokyakarta
Schwartz M. (1984), ‘Composite Materials Handbook’, McGraw-Hill, NewYork, USA.
Alamsyah., 2010, Analisis Sifat Mekanis Komposit Core Serbuk Kayu Jati Bermatrik Lem Fox(Lem Putih PVAc) Dilapisi Mowilex Dengan Variasi Fraksi Berat 20%, 30%, dan 40%, Tugas Akhir,Teknik Mesin UMS, Surakarta
Arif,S,Irawan,, D., & Jainudin, M. (2019). Analisis Sifat Mekanis Perbandingan Campuran Komposit Serbuk Gergaji Kayu Jati Dengan Matrik Epoxy Untuk Material Kampas Rem Cakram. Jurnal Technopreneur (JTech), 7(2), 58–63.
Arsyad, M., Suyuti, M. A., Hidayat, M. F., & Pajarrai, S. (2014). Pengaruh Variasi Arah Susunan Serat Sabut Kelapa Terhadap Sifat Mekanik. Jurnal Sinergi, 2, 101–113.
Rumbayan, R. (2020). Kuat Tekan , Kuat Lentur dan Daya Serap Air untuk Batako dengan Penambahan Serat Sabut Kelapa. Jurnal Polimdo, 2(3), 48–57.
Nauvally, A. (2023). Pengaruh faktor konsentrasi serbuk kayu jati terhadap sifat mekanik komposit bermatriks epoksi. 8606, 1–2.
Nurhidayat, Achmad, & Susilo, D. D. (2013). Pengaruh Fraksi Volume Pada Pembuatan Komposit HDPEm Limbah Cantula (Vol. 14, Nom
Mulyo, B. T., & Yudiono, H. (2018). Analisis Kekuatan Impak Pada Komposit Serat Daun Nanas Untuk Bahan Dasar sssPembuatan Helm SNI. Jurnal KompetensiTeknik, 10(2), 1–8.
Margono, B., Haikal, H., & Widodo, L. (2020). Analisis Sifat Mekanik Material Komposit Plastik Hdpe Berpenguat Serat Ampas Tebu Ditinjau Dari Kekuatan Tarik DanBending. AME (Aplikasi Mekanika danEnergi): Jurnal Ilmiah Teknik Mesin, 6(2), 55.
Hasbu Rida Mutasiana, “Pengaruh Variasi Ketebalan Core Honeycomb Kardus Tipe Bc-Flute Terhadap Karakteristik Bending Komposit Sandwich Serat Cantula," Universitas Sebelas Maret, 2014
ASTM, ASTM D790-03. US.
Copyright (c) 2026 LONTAR Jurnal Teknik Mesin Undana
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
