Karakteristik Tabung Udara Pada Pompa Hidram
Muhamad Jafri
Abstract
The purpose of this paper is to provide the fact that the air tube of a hydram pump. The method used in making this paper is to collect several published research articles on the effect of using an air tube on a hydram pump. The data obtained were analyzed to get air tube water on the hydram pump. The results of the analysis show that the use of an air tube has a good effect on improving the performance of the hydram pump. The greater the volume of the air tube, the higher the discharge air and the higher the pump efficiency.
Downloads
References
[2]. Matthias Inthachot et al, 2015, “Hydraulic ram pumps for irrigation”, in Northern Thailand Agriculture and Agricultural Science Procedia 5 pp. 107 – 114.
[3]. Harith, M. N., Bakar, R. A., Ramasamy, D., Ma Quanjin, 2017, “A significant effect on f low analysis & simulation study of improve design hydraulic pump”, 4th International Conference on Mechanical Engineering Research (ICMER2017), IOP Conference Series: Materials Science and Engineering.
[4]. Diwan, P., Patel, A., and Sahu, L, 2016,. “Design and Fabrication of Hydraulic Ram with Methods of Improving Efficiency”, in International Journal of Current Engineering and Scientific Research (IJCESR), Vol. 3, No. 4, (Technical Research Organization India, 2016), pp. 5-13.
[5]. Rohan, D. Balgude, at al, 2015, “Designing of Hydraulic Ram Pump”. International Journal of Engineering and Computer Science ISSN: 2319-7242 Volume 4 Issue 5 May 2015, Page No. 11966-11971.
[6]. Seth, J., 2013 How to build a Hydraulic Ram Pump,” LandToHouse.com.
[7]. Young, B. W., 1996, “Journal of Power and Energy,” 1990-1996 (vols 204-210), 210 p 245-248.
[8]. Hussin, N.S.M., Gamil, S.A., Amin, N.A.M., Safar, M.J.A., Majid, M.S.A., Kazim, M.N.F.M., Nasir, N.F.M, 2017, “Design and analysis of hydraulic ram water pumping system,” In Proceedings of the International Conference on Applications and Design in Mechanical Engineering (ICADME 2017), Penang, Malaysia, 21–22 August 2017.
[9]. Made, S., dan IKG Wirawan, 2008, “Kajian eksperimental pengaruh tabung udara pada head tekanan pompa hidram,” Jurnal Ilmiah Teknik Mesin CAKRAM Vol. 2 No. 1, Juni 2008 (10 –14).
[10]. Charles Silla, Muhamad Jafri, Ishak S. Limbong, 2014, “Pengaruh Diameter Tabung Udara dan Jarak Lubang Pipa Tekan dengan Katup Pengantar terhadap Efisiensi Pompa Hidram,” LONTAR Jurnal Teknik Mesin Undana, Vol. 01, No. 02, Oktober 2014.
[11]. Budi Hartono, 2014, “Pengaruh Variasi Tabung Udara terhadap Debit pemompaan Pompa Hidram,” SINTEK JURNAL, Vol. 8, No. 1, UMJ, Jakarta.
[12]. Eko S., Romadhon Tri W., Setia Pradana, Naif Fuhaid, 2013. “Pengaruh Volume Tabung Udara dan Beban Katub Limbah Terhadap Efisiensi Unjuk Kerja Pompa Hidram, PROTON, Vol. 5 No 2 / Hal 1-4
[13]. Gan Shu San dan Gunawan Santoso, 2002, “Studi Karakteristik Volume Tabung Udara dan Beban Katup Limbah Terhadap Efisiensi Pompa Hydraulic Ram, JURNAL TEKNIK MESIN, Vol. 4, No. 2, hal. 81 – 87.
[14]. Dinar M. F., Hari Anggit C. W., Latifah N. Q., Enjang J.M, 2013, “ Uji Efisiensi Pompa Hidram dengan Variasi Volume Tabung Udara, Prosiding Seminar Kontribusi Fisika (SKF2013), 2-3 Desember2013, Bandung, Indonesia.
[15]. Teguh Irawan, Nova Risdiyanto Ismail, Suriansyah, 2016, “ Pengaruh volume tabung udara dan beban katup buang dengan Jarak katup delivery 2 cm terhadap kinerja pompa hidram, Widya Teknika, Vol. 24 No. 1 ; Oktober 2016 ISSN 1411 – 0660: 59 – 64.
[16]. Sumio Saito, Masaaki Takahashi and Yoshimi Nagata, 2011, “Effects of the Air Volume in the Air Chamber on the Performance of Water Hammer Pump System”, International Journal of Fluid Machinery and Systems, Vol. 4, No.2.