The Discontinuous Carbon Fiber Composite: A Review of the Damage Characteristics
-
Jefri S. Bale(1)
Jurusan Teknik Mesin, Fakultas Sains dan Teknik, Universitas Nusa Cendana
https://orcid.org/0000-0001-9946-8110
(*) Corresponding Author
Abstract
Abstract
Discontinuous carbon fiber composite (DCFC) is one of new low-cost material product form that had applied for commercial component such as window frames of the Boeing 787 Dreamliner. Study on DCFC was very challenging since it did not have the same nature behavior like conventional composite nor isotropic materials. In this work several studies on damage characteristics of DCFC material were presented. The damage characteristics of DCFC were investigated while undergoing static and fatigue loading. In particular, the damage mechanisms of DCFC were also observed through several nondestructive testing (NDT) methods. The review had shown that the study of DCFC specimen gives an interesting challenges for the future work to understand its damage characteristics and the reliability of the NDT method to study the damage of DCFC material.
Downloads
References
A.M. Waas, A.J. Hyun, and A.R. Khamseh, "Compressive failure of notched uniply composite laminates", Composites Part B 29B., pp. 75-80, 1998.
B. Boursier, "New possibilities with HexMC, a high performance moulding compound", 22nd SAMPE European conference, March 2001.
L.T. Harper, "Discontinuous carbon fiber composite for automotive applications", Thesis submitted to the University of Nottingham for the degree of Doctor of Philosophy, 2006.
M. Turtle, T. Shifman and B. Boursier, Simplifying certification of discontinuous composite material forms primary aircraft structures, Hexcel Research and Technology.2010. http://www.hexcel.com
C. Bathias, "An engineering point of view about fatigue of plymer matrix composite materials", International Journal Fatigue 28. pp. 1094-1099, 2006.
B. Boursier and A. Lopez, "Failure initiation and effect of defects instructural discontinuous fiber composites", Hexcel Research and Technology, 2010. [Online]. Available : http://www.hexcel.com.
P. Feraboli, E. Peitso, F. Deleo, T. Cleveland, M. Graves, and P. Stickler, "Characterization of prepeg-based discontinuous carbon fiber/epoxy systems ", Journal Reinforcement Plastic Composite, accepted for publication. 2009.
P. Feraboli, E. Peitso, T. Cleveland, P. Stickler B, C.J. Halpin, "Notched behavior of prepeg-based discontinuous carbon
fiber/epoxy systems", Composites : Part A 40., pp. 289-299, 2009.
C. Qian, L.T. Harper, T.A. Turner, and N.A. Warrior, " Notched behavior of discontinuous carbon fiber composites: Comparison with quasi-isotropic non-crimp fabric", Composites: Part A 42., pp. 293–302, 2011
J. bale, The Damage Observation of Composite Using Non Destructive Testing (NDT) method. Dissertation. Université Paris Ouest. 2014.
P. Feraboli, T. Cleveland, M. Ciccu, P. Stickler, and L. DeOto, "Defect and damage analysis of advanced discontinuous carbon/epoxy composite materials", Composites: Part A 41., pp. 888-901. 2010. [Online]. Available: http://www.aa.washington.edu/research/structures/pubs/208 pdf
J. Bale, E. Valot, M. Monin, P. Laloue, O. Polit, C. Bathias, T.P. Soemardi, Thermography observation on damage behavior of discontinuous carbon fiber composite, The 13th Japanese-European Symposium on Composite Materials, Bougenais, France. 2013.
M.D. Bond, L.T. Harper, T.A. Turner, N.A. Warrior, "Full-field strain measurement of notched discontinuous carbon fiber composites", ICCM 17 Proceeding. [Online].2010. Available: http://www.iccm-central.org
P. Feraboli, E. Peitso and T. Cleveland, "Modulus measurement for prepeg-based discontinuous carbon fiber/epoxy systems ", Journal of composite materials Vol. 43 No.19., pp. 1947-1965, 2009
