DOOR SECURTY SYSTEM DESIGN BASED ON INTERNET OF THINGS
-
Nurlinah Nurdin(1*)
Universitas Sulawesi barat
-
Heliawati Hamrul(2)
Universitas Sulawesi Barat
-
Musyrifah Musyrifah(3)
Universitas Sulawesi Barat
(*) Corresponding Author
Abstract
The development of the internet of things (IoT) is one of the influencing factors in the industrial era 4.0 towards the next industrial era, where with this technology humans can communicate with electronic devices connected to microcontrollers remotely using an internet connection. The door is a place to enter or exit to start daily activities. Therefore, door security is the main thing in designing a good room security. This research uses research and development methods, namely methods that aim to produce or develop certain products. There are several stages in the research, namely (1) literature review (2) analysis of tool and material requirements (3) Arduino Integrated Development Environment (IDE) schema design (4) system design with Arduino Nano and (5) system testing and analysis. It can be concluded from the test results that the door safety device can work according to the design made, considering the results of the Arduino Uno which can be connected to Radio Frequency Identification (RFID) and read e-KTP ID and passive infra-red or PIR sensors to detect movement and send notification to Telegram.
Downloads
References
F. Husniyah, M. Ulum, K. A. Wibisono, and R. Alfita, “Rancang Bangun Sistem Pengaman Pintu Menggunakan RFID dan Fingerprint,” pp. 1–8, 2021.
E. Saputro, “Rancang Bangun Pengaman Pintu Otomatis Menggunakan E-KTP Berbasis Mikrokontroler Atmega328,” Skripsi Tek. Elektro Unnes, vol. 8, no. 1, pp. 1–4, 2016.
M. J. Mega Putra Yogia Santoso, Koesmarijanto, “Perancangan sistem keamanan central lock mobil menggunakan identifikasi E-KTP,” J. JARTEL, pp. 404–410, 2019.
F. Susanto, M. N. Rifai, and A. Fanisa, “Internet of Things Pada Sistem Keamanan Ruangan, Studi Kasus Ruang Server Perguruan Tinggi Raharja,” Semin. Nas. Teknol. Inf. dan Multimed. 2017, pp. 1–6, 2017, [Online]. Available: http://ojs.amikom.ac.id/index.php/semnasteknomedia/article/download/1809/1531
D. Nur and R. Khair, “Otomatisasi Alat Penghitung Jumlah Spare Part berbasis Internet of Things ( IOT ) pada CV . Wira Teknik,” pp. 123–128, 2021.
A. Uno, P. T. Xyz, R. S. K, and G. Sembada, “Jurnal E-KOMTEK ( Elektro-Komputer-Teknik ) Perancangan Sistem Keamanan Menggunakan Solenoid Door Lock Berbasis,” vol. 4, no. 1, pp. 62–74, 2020.
M. Dona, A. C. Louk, and J. L. Tanesib, “Otomatisasi Sistem Buka-Tutup Atap Rumah Teleskop Dan Pengontrol Kelembaban Udara Menggunakan Raspberry Pi 3,” J. Fis. Fis. Sains dan Apl., vol. 3, no. 3, pp. 163–169, 2018, doi: 10.35508/fisa.v3i3.622.
S. Aminah, H. Hambali, and R. F. Lubis, “Perancangan Alat Absensi Mahasiswa Berdasarkan Mata Kuliah Menggunakan E-KTP Berbasis NODEMCU,” JUTSI (Jurnal Teknol. dan Sist. Informasi), vol. 1, no. 1, pp. 103–110, 2021, doi: 10.33330/jutsi.v1i1.1054.
G. C. Lenardo, Herianto, and Y. Irawan, “Pemanfaatan Bot Telegram sebagai Media Informasi Akademik di STMIK Hang Tuah Pekanbaru,” JTIM J. Teknol. Inf. dan Multimed., vol. 1, no. 4, pp. 351–357, 2020, doi: 10.35746/jtim.v1i4.59.
M. R. Hidayat, C. Christiono, and B. S. Sapudin, “PERANCANGAN SISTEM KEAMANAN RUMAH BERBASIS IoT DENGAN NodeMCU ESP8266 MENGGUNAKAN SENSOR PIR HC-SR501 DAN SENSOR SMOKE DETECTOR,” Kilat, vol. 7, no. 2, pp. 139–148, 2018, doi: 10.33322/kilat.v7i2.357.
Copyright (c) 2022 Nurlinah Nurdin, Heliawati Hamrul, Musyrifah Musyrifah
This work is licensed under a Creative Commons Attribution 4.0 International License.
The author submitting the manuscript must understand and agree that if accepted for publication, authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution (CC-BY) 4.0 License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
