SISTEM PENDUKUNG KEPUTUSAN PEMBERIAN PINJAMAN MENGGUNAKAN APLIKASI FUZZY SIMPLE ADDITIVE WEIGHTING
STUDI KASUS: KOPERASI KREDIT MONAFEN
-
Lorenso Kanuru(1)
Universitas Nusa Cendana
-
Dony M Sihotang(2*)
Universitas Nusa Cendana
-
Bertha S Djahi(3)
Universitas Nusa Cendana
(*) Corresponding Author
Abstract
The loan service process is one of many routines applied to improve the welfare of either members or the community in cooperative. This process requires a high accuracy in selecting the eligible loans. Bad credits, that oftenly occurred in many cooperative membership, mainly caused by the lack of accuracy of the cooperative itself in selecting eligible loans based on the specific criterias. Implements and development for loan decision support system using Fuzzy Simple Additive Weighting (F-SAW) method. This method is able to accommodate the deficiancy of SAW in terms of providing linguistic assessments. The system is tested by comparing the system decision to the cooperative decision. According to 7 test data with loan amount below Rp 10,000,000 and 5 test data with loan amount between Rp 15,000,000 – Rp 20,000,000, it appears that 9 of them provide the same decision as what the committee decided (75%), while 3 of them do not (25%).
Downloads
References
[2] Monafen, 2016, Laporan Rapat Anggota Tahunan Kopdit Monafen per Agustus 2016, Teunbaun – Amarasi Barat.
[3] Fishburn, P.C., 1967, Additive Utilities with Incomplete Product Set: Application to Priorities and Assignments. Operations Research Society of America (ORSA), Baltimore, MD, U.S.A.
[4] Yakub, 2012, Pengantar Sistem Informasi, Pertama Penyunting, ANDI, Yogyakarta.
[5] Knight, L.V. & Steindach, T.A., 2008, Selecting an Appropriate Publication Outlet: A Comprehensive Model of Journal Selection Criteria for Researchers in A Broad Range of Academic Disciplnes, International Journal of Doctoral Studies, Vol. 3, Hal. 59-79.
[6] Yanar, L., Tozan, H., & Hloch, S., 2012, Selection of Equipment for Soft Tissue Cutting Using Fuzzy AHP and Fuzzy ANP With A Proposed Decision Support System, Manufacturing Engineering & Management The Proceedings, Turkish.
[7] Turban, E., Aronson, J.E., & Liang, T.P., 2005, Karakteristik dan Kapabilitas Kunci dari Sistem pendukung Keputusan, Dalam: D. Prabantini, Penyunting, Decision Support Systems and Intelligent Systems, ANDI, Yogyakarta.
[8] Zadeh, L.A., 1965, Fuzzy Sets Information and Control, Vol. 8, Hal. 338-353.
[9] Tettamanzi, A., & Tomassini, M., 2001, Soft Computing Integrating Evalutionary Neural and Fuzzy System, Springer-verlag, Berlin.
[10] Wang, W., 2006, Smallest confidence intervals for one binomial proportion, Journal of Statistical Planning and Inference, Department of Mathematics and Statistics, Wright State University, Dayton, Vol. 136, Hal. 4293-4295.
[11] Irfan E. & Nilsen K., 2008, Comparison of fuzzy AHP and Fuzzy TOPSIS methods for facility location selection. International Journal advanced Manufacturing Technology ; 39:783-795.
[12] Sagar, M.K., Jayaswal, P., & Kushwah, K., 2013, Exploring Fuzzy SAW Method for Maintenance Strategy Selection Problem of Material Handling Equipment, International Journal of Current Engeneering and Technology, Vol. 3, Hal. 600-605.
[13] Muljono, D., 2012, Buku Pintar Strategi Bisnis Koperasi Simpan Pinjam, Penyunting Pertama, ANDI, Yogyakarta.
[14] Aritonang, H.M., 2009, Analisis Keberadaan Credit Union (CU) Sebagai Lembaga Pembiayaan di Kelurahan Saribudolok Kecamatan Silimakuta, Kab. Simalungun, Fakultas Pertanian, Universitas Sumatera Utara, Medan.
[15] Undang-Undang, 1992. Undang-Undang No. 25 Tahun 1992 tentang Perkoperasian, Lembaran Negara RI Tahun 1992 Pasal 1, Sekretariat Negara, Jakarta.
Copyright (c) 2018 Jurnal Komputer dan Informatika
This work is licensed under a Creative Commons Attribution 4.0 International License.
The author submitting the manuscript must understand and agree that if accepted for publication, authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution (CC-BY) 4.0 License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
