USULAN PENINGKATAN KUALITAS PRODUK PLASTIK DENGAN FISHBONE ANALYSIS DI PT.XYZ
-
Fanny Nurul Amalia(1*)
Jurusan Teknik Industri, Universitas Trisakti
-
Wawan Kurniawan(2)
Jurusan Teknik Industri, Universitas Trisakti
-
Anik Nur Habyba(3)
Jurusan Teknik Industri, Universitas Trisakti
(*) Corresponding Author
Abstract
Quality is something that must be considered by every company when carrying out the production process in order to get results that are in accordance with standards. PT. XYZ is a company engaged in manufacturing which produces several types of plastics. One type of plastic that is produced by the company and often used by the public is HD plastic in the form of a plastic bag used for shopping. After conducting the research, the product defect in this type of plastic exceeds the defect standard that has been set at 3%. So this research is done using the fishbone analysis method which is used to analyze the factors that affect the quality of plastic bag products. The steps in solving this problem are using CTQ to identify defects in a product. Then do the DPMO and Sigma Level calculations. After that, identify the cause of the problem with the disability that occurs. This problem can be solved using the FMEA method to find out what problems will be solved first.
Keywords: Fishbone Analysis, FMEA, DPMO, Sigma Level
Downloads
References
Tannady, H., & Chandra, C. (2016). Analisis Pengendalian Kualitas dan Ususlan Perbaikan pada Proses Edging di PT Rackindo Setara Perkasa dengan Metode Six Sigma. Journal of Industrial Engineering & Management Systems.
Devani, V., & Wahyuni, F. (2016). Pengendalian Kualitas Kertas Dengan Menggunakan Statistical Process Control di Paper Machine 3. Jurnal Ilmiah Teknik Industri, 87-93.
Mayangsari, D. F., Adianto, H., & Yuniati, Y. (2015). Usulan Pengendalian KUaliatas Produk Isolator dengan Metode Failure Mode and Effect Analysis (FMEA) dan Fault Tree Analysis (FTA). Jurnal Online Institut Teknologi Nasional, 81-91.
Muttaqin, A. Z., & Kusuma, Y. A. (2018). Analisis Failure Mode And Effect Analysis Proyek X di Kota Madiun. Jati Unik, 81-96.
Gasperz, V. (1998). Statistical Process Control. Jakarta: PT Gramedia Pustaka Utama.
